Henry 1.1/8" ODS Helical Oil Seperator, Side Inlet, Outlet and Oil Return

The function of a Helical Oil Separator is to efficiently remove oil from the discharge gas and return it to the compressor, either directly or indirectly. This helps maintain the compressor crankcase oil level and raises the efficiency of the system by preventing excessive oil circulation. The Helical oil separator features a centrifugal flow path that achieves approximately 99% efficiency of oil separation with a low pressure drop. Independent testing has found that only 0.006% oil by volume was being discharged into the system after leaving a Helical oil separator. Virtually oil free refrigerant vapour exits the oil separator. A higher level of efficiency is to be expected compared to an Impingement type separator.

Features:

• Patented Henry Technologies Design
  
• High oil separation efficiency – up to 99%.
  
• Low pressure drop.
  
• No blocked elements because of too much oil in the system.
  
• No oil blow-out at start up from oil left in a coalescing element.